ORGANCIDE QC 50

Description

Bactericidal, fungicidal, and algicidal treatment against:

• the biological deterioration of works of art caused by microorganisms
• the growth of moss and lichen on roofs
• algae growth on building facades
• dry rot, which attacks the wooden structures of buildings
• algae in swimming pools, particularly the most resistant types

Restores stones, sculptures, tiles, and slate; is particularly effective at removing lichens and mold that thrive in humid conditions.

– Approved by the Research Laboratory for Historic Monuments
– Complies with regulations
– For more information, click here
– Available in 22 kg and 1 kg containers

PROPERTIES

- Soluble in water in all proportions
- Compatible with cationic and non-ionic products
- Complies with regulations on cleaning products for equipment that may come into contact with foodstuffs

FEATURES

- 50% aqueous solution of benzalkonium chloride
- Stable under normal conditions
- Density: 0.975-0.995

DOSAGE

• ARTWORKS, ROOFS, FACADES & MERULE => 1 liter of Organcide QC50 + 9 liters of water = 10 liters of ready-to-use solution
• SWIMMING POOLS: Pure Use (Organcide QC50)

CONSUMPTION

• ARTWORKS: 0.2 to 0.5 liters of ready-to-use solution per square meter
• ROOFING: 0.5 liters of ready-to-use solution per square meter
• EXTERIOR WALLS: 0.5 liters of ready-to-use solution per square meter
• MERULE: 0.5 liters of ready-to-use solution per square meter
• SWIMMING POOLS: 0.5 liters of undiluted product per 50 m³ (cubic meters) of water

APPLICATION & POINTS TO NOTE

• ARTWORKS, ROOFS & FACADES: Apply the ready-to-use solution to the surface using a brush or sprayer (1 liter of Organcide QC50 + 9 liters of water = 10 liters of ready-to-use solution)
• MERULE: First, inject the solution into the wood or walls every 30 cm in a staggered pattern, penetrating up to two-thirds of the thickness; then, brush the surface. These two steps should be performed using the ready-to-use solution (1 liter of Organcide QC50 + 9 liters of water = 10 liters of ready-to-use solution).
• SWIMMING POOLS: Do not use this product if the pool is already treated with PHMB or a copper-based product, or if the water is very choppy (as the product may cause foaming). Do not use more than once every three months, unless the pool is completely drained.